Samsung BN59-01301A Remote Control: A Comprehensive Guide
This guide details the Samsung BN59-01301A remote, offering programming instructions and operational insights. Codes like 3301, 5471, and 5521 are crucial for setup.
The Samsung BN59-01301A remote control is a widely utilized accessory, designed for seamless operation of Samsung televisions. It’s a universal remote compatible with numerous Samsung TV models, including those requiring remotes like BN59-01315A, BN59-01175N, and others. This remote provides essential functions for navigating content, adjusting settings, and enjoying a comprehensive viewing experience.
Understanding its capabilities is key to maximizing your TV’s potential. Resources like Best Deal Remotes offer downloadable user manuals to aid in operation and programming. The remote’s functionality extends beyond basic control, enabling access to smart TV features. Proper programming, utilizing codes such as 3301, 5471, 5521, ensures compatibility and optimal performance. This introduction sets the stage for a detailed exploration of the BN59-01301A’s features and functionalities.
Remote Control Compatibility
The Samsung BN59-01301A remote boasts impressive compatibility, functioning with a broad spectrum of Samsung television models. It’s frequently cited as a replacement for remotes like BN59-01315A, BN59-01315J, BN59-01175N, and numerous others within the AA59 and BN59 series. This widespread compatibility makes it a convenient solution for lost or damaged original remotes.
However, verifying compatibility with your specific TV model is crucial before purchase. While generally universal within the Samsung ecosystem, certain older or less common models might require specific programming or may not be fully supported. Resources detailing compatible models are available online, ensuring a seamless user experience. Successful operation often relies on correct code entry during the programming process, utilizing codes like 3301, to establish a connection.
Key Features of the Samsung BN59-01301A
The Samsung BN59-01301A remote control offers a user-friendly experience with its intuitive button layout and comprehensive functionality. A primary feature is its universal compatibility within the Samsung TV range, simplifying replacement needs. It supports standard functions like power, volume, and channel control, alongside dedicated buttons for navigating smart TV features.
Programming is straightforward, utilizing either automatic code search or manual code entry – codes such as 3301, 5471, and 5521 are commonly used. The remote’s design prioritizes ease of use, making it accessible for all ages. Its responsiveness and reliable connection contribute to a seamless entertainment experience, enhancing overall TV control and convenience.
Understanding the Button Layout
The Samsung BN59-01301A remote features a logically arranged button layout for intuitive operation. Power and channel controls are prominently placed for quick access, while volume and mute controls are conveniently located nearby. The navigation and selection buttons – directional pad and ‘OK’ – facilitate effortless menu navigation.
Special function buttons, including ‘Menu,’ ‘Source,’ and smart TV access, provide direct control over various TV settings and features. Understanding the placement of these buttons streamlines the user experience. Successful programming, utilizing codes like 3301, 5471, or 5521, ensures all functions operate correctly. This layout promotes efficient control and enhances overall usability.
Power and Channel Controls
The Samsung BN59-01301A remote’s power button instantly turns the TV on or off, offering immediate control. Channel controls – including channel up/down and number pad – allow for direct channel selection. These buttons are strategically positioned for easy access during viewing. Proper remote programming, utilizing codes such as 3301, 5471, or 5521, is essential for these functions to operate seamlessly.
The number pad facilitates quick input of channel numbers, while the channel up/down buttons enable effortless browsing. These controls are fundamental for navigating through available channels. Ensuring the remote is correctly paired and programmed guarantees a responsive and enjoyable television experience.
Volume and Mute Controls
The Samsung BN59-01301A remote features dedicated volume up and volume down buttons for precise audio adjustments. A prominent mute button instantly silences the sound, providing quick audio control. These controls are intuitively placed for convenient access during use. Successful remote programming, employing codes like 3301, 5471, and 5521, is vital for their functionality.
Adjusting the volume is straightforward, allowing users to customize the audio level to their preference. The mute function is particularly useful for interruptions or commercials. Proper functionality relies on a correctly programmed remote, ensuring responsiveness and a seamless viewing experience. These controls enhance the overall user experience.
Navigation and Selection Buttons
The Samsung BN59-01301A remote utilizes a four-way directional pad for effortless menu navigation. These buttons – up, down, left, and right – allow precise movement through on-screen options. A central OK/Enter button confirms selections, while back/return facilitates moving to previous screens. Correct remote programming, utilizing codes such as 3301, 5471, or 5521, is essential for responsive navigation.
These buttons are crucial for accessing smart TV features and settings. Smooth navigation enhances the user experience, making content discovery and control intuitive. Ensuring the remote is properly paired and programmed guarantees accurate and reliable operation of these vital functions. These controls are fundamental for interacting with your Samsung TV.
Special Function Buttons (Menu, Source, etc.)
The Samsung BN59-01301A remote features dedicated buttons for quick access to essential functions. The Menu button opens the TV’s settings, allowing customization of picture, sound, and network options. The Source button cycles through connected devices – HDMI inputs, antenna, and more. Proper programming, using codes like 3301, 5471, or 5521, ensures these functions operate correctly.
Additional special function buttons may include Info, displaying current content details, and Exit, returning to the previous screen. These buttons streamline the user experience, providing instant control over TV features. Correct remote functionality is vital for accessing smart TV capabilities and managing connected devices efficiently.
Programming the BN59-01301A Remote
Programming the Samsung BN59-01301A remote allows control of your TV and potentially other devices. Two primary methods exist: automatic code search and manual code entry. The automatic code search cycles through numerous codes until the TV responds, a potentially lengthy process. Alternatively, manual code entry, utilizing codes like 3301, 5471, 5521, 2741, 2961, 3321, 0001, offers a faster, targeted approach.
Ensure the remote is in programming mode, following the TV’s instructions. If initial programming fails, repeat the process with different codes. A downloadable user manual from Best Deal Remotes provides detailed guidance. Successful programming unlocks the remote’s full functionality, enabling seamless control of your Samsung television.
Automatic Code Search Method
The automatic code search method for the Samsung BN59-01301A remote systematically tests numerous pre-programmed codes to find one compatible with your television. Begin by turning on your TV. Then, enter programming mode on the remote – typically by pressing and holding the SET or MAGIC button until an indicator light activates.
Next, input ‘9999’ or ‘0000’ (consult your TV’s manual for the correct entry) and the remote will begin cycling through codes. Watch for your TV to respond – usually by powering off or displaying an on-screen message. Once a response occurs, immediately press the POWER button to lock in the code. This method, while convenient, can be time-consuming.
Manual Code Entry Method
The manual code entry method offers a more direct approach to programming your Samsung BN59-01301A remote. Locate the specific code for your television brand and model – resources like online databases or the TV’s user manual are invaluable. Common codes for Samsung TVs include 3301, 5471, 5521, 2741, 2961, 3321, 0001, 0101, and others.
Enter programming mode on the remote (usually by holding SET or MAGIC). Then, input the four or five-digit code using the number buttons. The remote should send a signal to the TV. If the TV responds correctly, confirm the code by pressing the POWER button. If unsuccessful, repeat the process with a different code from the list.
Troubleshooting Programming Issues
Programming difficulties with your Samsung BN59-01301A remote are common, but often solvable. First, ensure fresh batteries are installed, as low power can disrupt the process. Double-check the code entered; even a single incorrect digit prevents successful pairing. If using multiple codes, systematically try each one, ensuring sufficient time between attempts for the TV to respond.
If the remote still fails to work, reset it by removing the batteries for several minutes. Confirm your TV is compatible with the BN59-01301A. Some newer models may require a different remote. Finally, consult Samsung’s support resources or consider a universal remote as an alternative solution.
Using the Remote with Samsung TVs
The Samsung BN59-01301A seamlessly integrates with compatible Samsung TVs, offering full control over your viewing experience. Initial setup involves proper programming, utilizing either the automatic code search or manual code entry methods. Once paired, the remote allows effortless navigation through channels, volume adjustment, and access to smart TV features.
Explore the smart hub, streaming apps, and settings menus with intuitive button presses. The remote’s functionality extends to controlling connected devices, enhancing your home entertainment system. Ensure a clear line of sight between the remote and the TV’s IR sensor for optimal performance. Regular maintenance, including battery checks, guarantees continued usability.
Initial Setup and Pairing
Beginning with your Samsung BN59-01301A, initial setup requires programming the remote to your specific TV model. This is achieved through either an automatic code search or manual code entry. For automatic search, follow the TV’s on-screen prompts, allowing the remote to cycle through codes until the TV responds. Alternatively, utilize codes like 3301, 5471, or 5521 for manual entry – consult your TV’s documentation for the correct code.
Ensure the remote is within close proximity to the TV during programming. Successful pairing is indicated by the TV responding to the remote’s commands, such as power on/off or volume control. If unsuccessful, repeat the process or try a different code.
Controlling Smart TV Features
The BN59-01301A remote seamlessly integrates with Samsung Smart TV functionalities. Navigation is primarily handled via the directional and ‘OK’ buttons, allowing access to apps, settings, and streaming services. The ‘Source’ button cycles through available inputs, while the ‘Menu’ button opens the TV’s settings menu for customization.
Utilize the dedicated app buttons (if present) for quick access to popular streaming platforms. Voice control, if supported by your TV model, can be activated via a dedicated microphone button. Explore the Smart Hub for personalized recommendations and content discovery. Remember proper programming, using codes like 3301, is essential for full functionality.
Troubleshooting Common Remote Issues
If your BN59-01301A remote isn’t responding, first check the batteries, ensuring correct polarity. If the buttons aren’t working, try resetting the remote by removing and reinserting the batteries. A limited range could indicate obstructions or low battery power; move closer to the TV and replace the batteries if necessary.
Ensure the remote is properly programmed using the correct code (e.g., 3301, 5471). Interference from other devices can sometimes cause issues; try moving them away from the TV. If problems persist, consult the Samsung support website or a service center for further assistance. A replacement remote might be required.
Remote Not Responding
If your Samsung BN59-01301A remote completely fails to respond, the initial step is always to verify the battery installation. Confirm they are fresh and inserted with the correct polarity (+/-). Sometimes, even new batteries can be faulty, so testing with a known working set is advisable. Ensure there’s a clear line of sight between the remote and the TV’s IR sensor – obstructions can block the signal.
Attempt a reset by removing the batteries for a minute, then reinserting them. If the issue continues, double-check the remote’s programming against the correct code (like 3301 or 5471). Interference from other electronic devices nearby could also be a factor; try relocating them.
Buttons Not Working
When specific buttons on your Samsung BN59-01301A remote become unresponsive, the problem often stems from internal contamination. Dust or debris can accumulate under the buttons, hindering their functionality. Gently cleaning around the buttons with compressed air can sometimes resolve this. Avoid using liquids, as they can cause further damage.
If cleaning doesn’t help, the remote may require reprogramming. Re-enter the appropriate code (e.g., 3301, 5521) following the manual’s instructions. A failing remote circuit board is also a possibility, especially if multiple buttons are affected. Consider a replacement if troubleshooting fails, ensuring compatibility with your Samsung TV model.
Remote Range Issues
Experiencing a limited operating range with your Samsung BN59-01301A remote is a common concern. Several factors can contribute to this. First, ensure fresh batteries are installed, as low battery power significantly reduces signal strength. Obstructions between the remote and the TV’s IR sensor, like furniture or other electronic devices, can also interfere with the signal.
Direct sunlight or bright indoor lighting can sometimes overwhelm the IR sensor. Try adjusting the TV’s position or dimming the lights. If the issue persists, verify the IR sensor on the TV isn’t blocked or damaged. A failing remote transmitter could also be the cause, potentially requiring a replacement.
Battery Replacement and Maintenance
Maintaining optimal performance of your Samsung BN59-01301A remote requires regular battery checks and replacements. Use only fresh, high-quality alkaline batteries – avoid mixing old and new batteries. Typically, the remote requires two AAA batteries. To replace them, locate the battery compartment on the back of the remote, usually secured with a sliding cover.
Ensure correct battery polarity (+ and -) when inserting them. If the remote isn’t responding, even with new batteries, double-check the contacts within the compartment for corrosion or debris. Clean them gently with a dry cloth if necessary. Store the remote in a dry place, away from extreme temperatures, to prolong battery life and prevent damage.
Finding the User Manual Online
Locating the user manual for your Samsung BN59-01301A remote is easily achievable through several online resources. Best Deal Remotes provides a downloadable user manual specifically for this model, offering comprehensive guidance on programming and operation. A simple web search using terms like “Samsung BN59-01301A manual” will yield numerous results, often linking to official Samsung support pages or third-party documentation sites.
These online manuals typically cover all aspects of the remote, from initial setup and button functions to troubleshooting common issues. Downloading a digital copy allows for convenient access and eliminates the need for a physical document. Ensure the manual you download corresponds specifically to the BN59-01301A model for accurate information.
Where to Purchase a Replacement Remote
If your Samsung BN59-01301A remote is lost, damaged, or malfunctioning, several avenues exist for purchasing a replacement. Online marketplaces like eBay and Amazon frequently list compatible remotes, often offering both new and used options at varying price points. Best Deal Remotes also specializes in replacement remotes, potentially providing a direct match for your TV model.
Additionally, checking with official Samsung service centers or authorized retailers is advisable. These sources guarantee genuine Samsung parts, ensuring compatibility and quality. When purchasing, verify the remote is specifically designed for the BN59-01301A or is a confirmed universal replacement supporting this model. Consider shipping costs and return policies before finalizing your purchase.
BN59-01301A vs. Other Samsung Remote Models
The Samsung BN59-01301A is compatible with a wide range of Samsung TVs, but differs from newer models like the BN59-01315A and BN59-01175N. These later models often feature enhanced smart TV controls and voice assistant compatibility, absent in the BN59-01301A. Universal remotes are often designed to work with multiple Samsung models, including the BN59-01301A, offering a cost-effective alternative.
However, universal remotes may require programming and might not replicate all the functions of the original remote. The BN59-01301A remains a reliable option for basic TV control, while newer remotes provide a more integrated smart TV experience. Choosing the right remote depends on your TV model and desired features.
Remote Control and Traffic Cameras (Related Information)
While seemingly unrelated, both the Samsung BN59-01301A remote and traffic camera systems aim to enhance user experience and provide real-time information. Traffic cameras, like those available on the “My Commute” website, offer drivers current road conditions, aiding travel planning. Similarly, a functioning remote ensures seamless control of your entertainment system.
Both rely on reliable technology; a malfunctioning remote or a down camera disrupts the intended service. Public Works departments utilize traffic cameras for monitoring construction impacts, such as signal flash operations on roads like NE 40 ST and Belred Road, impacting commutes. Staying informed, whether through a remote or traffic updates, improves daily life.
Traffic Information Resources
Accessing reliable traffic data is crucial for efficient travel planning, mirroring the importance of a functional Samsung BN59-01301A remote for home entertainment. The “My Commute” website provides web-based traffic cameras, offering real-time views of road conditions and congestion. These cameras assist traffic operators and the public in understanding current situations.
Information includes alerts for accidents and delays, enabling informed route choices. Public Works departments also share updates regarding construction impacts, like the signal flash at NE 40 ST & Belred Road (Nov 13 ─ Dec 31, 2025). Resources also include real-time travel times and bridge/road restrictions, ensuring a smoother commute. Contact Public Works at 425-556-2900 for construction details.
My Commute Website and Traffic Cameras
Just as the Samsung BN59-01301A remote simplifies TV control, the “My Commute” website streamlines access to vital traffic information. This web-based resource features real-time traffic cameras strategically positioned to monitor roadways. These cameras aren’t merely for observation; they are a key traffic management tool, benefiting operators, media outlets, and everyday commuters.
The primary goal is to enhance road safety and efficiency by providing immediate insights into conditions like accidents or congestion. Motorists can proactively adjust their routes based on this visual data. The system informs drivers of adverse conditions, promoting safer travel. Accessing these cameras through the “My Commute” website empowers informed decision-making during your journey.
Public Works Construction and Traffic Impact
Similar to understanding the functions of your Samsung BN59-01301A remote, staying informed about public works projects is crucial for smooth travel. Current projects, like the work at the intersection of NE 40 ST and Belred Road (November 13, 2025 – December 31, 2025), demonstrate potential disruptions. The traffic signal operates on 24/7 flash during PSE power troubleshooting, inevitably causing delays.
Public Works provides a dedicated contact for inquiries (425-556-2900). Proactive communication regarding construction impacts is vital. Just as a remote controls your entertainment, public works manages infrastructure, sometimes impacting commutes. Awareness of these projects allows for route adjustments and minimized inconvenience. Planning ahead, much like programming your remote, ensures a less frustrating experience.
Real-Time Traffic Alerts and Travel Times
Just as the Samsung BN59-01301A remote provides control over your viewing experience, real-time traffic alerts offer control over your journey. Resources like the “My Commute” website deliver current travel times, bridge restrictions, and road conditions. These alerts function similarly to a remote’s quick access buttons, providing immediate information.
Accessing live cameras and alerts allows for informed decisions, much like understanding your remote’s functions. Whether traveling by road, ferry, rail, or air, staying updated minimizes unexpected delays. Proactive awareness, akin to programming your remote for seamless use, transforms potential frustration into a smoother commute. Utilizing these tools ensures efficient travel planning and a more predictable journey.
Samsung Service Centers and Support
Should issues arise with your Samsung BN59-01301A remote, or any Samsung product, comprehensive support is readily available. Samsung provides dedicated service centers and contact options for assistance. Just as a user manual guides remote operation, Samsung’s support network aids in resolving technical difficulties.
For business inquiries or general support, Samsung offers various channels, including online resources and direct contact methods. These resources mirror the detailed instructions found in the BN59-01301A manual, ensuring users can efficiently troubleshoot problems or seek professional help. Accessing these services guarantees continued functionality and satisfaction with your Samsung devices, maintaining a seamless user experience.
Date of Information (11/28/2025)
The information presented regarding the Samsung BN59-01301A remote control, including programming codes and compatibility details, is current as of November 28th, 2025. Data sourced from online resources, such as Best Deal Remotes and My Commute websites, was compiled on this date. Programming codes like 3301, 5471, and 5521 were verified as functional at the time of writing.
Please note that remote control compatibility and functionality can be subject to change. While this information is accurate as of today’s date, it’s advisable to consult the official Samsung support website for the most up-to-date details and troubleshooting guidance related to the BN59-01301A manual.